The Double RV Waste Valves # T68C and the Bristol Double RV Waste Valves # 34466ND17AAR are both going to serve the same purpose. The only real difference between the two is where they are manufactured.
The Bristol Double RV Waste Valves # 34466ND17AAR is made in the USA and the Double RV Waste Valves # T68C is not.
If being made in the USA means something to you, then you should go with the Bristol Double RV Waste Valves # 34466ND17AAR. Otherwise, you will be perfectly fine using the... view full answer...
I would be happy to recommend a replacement waste valve for you, but unfortunately we do not have a break down of which style waste valve is used on a specific RV.
A few of the different styles are a single 3" waste valve like the Valterra Waste Valve for RV Black Water Tank - 3" Spigot to 3" Lug # T50A, or a combined black water and grey water valve like the Double RV Waste Valves - Sewer Wye - Rotating - 3" Spigot and 1-1/2" Hub # TR38A.
If you can send me a picture of your current... view full answer...
The LaSalle Bristol Cable-Actuated RV Waste Valve # 34466N11AB72GMA is going to have a 72" long cable. This will allow you to open and close the valve even if it's in a hard-to-reach place. The shortest that this comes is the LaSalle Bristol Cable-Actuated RV Waste Valve # 34466N11AB36GM which has a 36" cable.
This is also available in a 48" and 60".
48"
- LaSalle Bristol Cable-Actuated RV Waste Valve # 34466N11AB48GMA
60"
- LaSalle Bristol Cable-Actuated RV Waste Valve # 34466N11AB60GM view full answer...
The gray water tank valve on the Bristol Double RV Waste Valves part # 34466ND13AAR can be replaced using the Bristol Waste Valve Body for RV Gray Water part # 34439241 or the Valterra Bladex Waste Valve Body for RV Gray Water Tank part # T1001VP. If you just want the seals then that would be the Valterra Bladex RV Waste Valve Seals part # T1001-9VP. view full answer...
Great question.
I can help you get what you need but I will need more information.
Unlike vehicles RVs are not at universal and variations are common place. The best way to find out is to take a picture of your current waste valve and send it in a reply to this email, then I can help find the right one.
The most common styles of waste valves are the following:
Double RV Waste Valves - Sanitation Tee - Rotating - 3" Hub and 1-1/2" Spigot # T18C.
Double RV Waste Valves - Sewer Wye -... view full answer...
In regards to the Bristol Double RV Waste Valves part # 34466ND13AAR, you can replace both the black valve section using the Bristol Waste Valve Body for RV Black Water part # 34439240 and the grey valve section using the Bristol Waste Valve Body for RV Gray Water part # 34439241. view full answer...
I have another option but there is not a Valterra shut off valve that has the camlock connector already installed to work with the Lippert Waste Master RV Sewer Hose w/ Leakproof Camlock and 90-Degree Nozzle # LC359724 you were looking at.
Instead If your current shut off valve has a 3" bayonet spigot like the Valterra Double RV Waste Valves # TR38B you will need to cut the lugs off of the valve, use sand paper to smooth out the surface, and then use Valterra ABS Solvent Cement # A05-0303... view full answer...
Yes, you can replace the 3" and 1-1/2" valves on your Bristol Double RV Waste Valves - Elbow - Rotating - 3" and 1.5" Hubs to 3" Spigot # 34466ND14AAR with the Bristol Waste Valve Body for RV Gray Water w/ Coupler, Seals, and Hardware - 1-1/2" Diameter # 34439241 and the Bristol Waste Valve Body for RV Black Water with Seals and Hardware - 3" Diameter # 34439240. view full answer...
The cable itself is not available for the LaSalle Bristol Cable-Actuated RV Waste Valve # 34466N4BB96GM,
However, we do carry Valterra products like the Valterra Waste Valve Body w/ Flexible Cable for RV Gray Water Tank # TC172- which do have replacement cables available. If you needed to replace the cable on a Valterra waste valve you would want to use the Valterra Cable with Valve Handle # TC96PB, which can be used with both Valterra and Bladex cable actuated waste valves. view full answer...
Here is a list of the replacement valve handles we currently carry. You will need to match them with the waste valves you have on your 1978 Taurus travel trailer as I am unable to determine what valves came on your camper.
Replacement Handle for LaSalle Bristol Cable-Actuated RV Waste Valves Gray # 34490CMA1G, Black # 34490CMA1.
Replacement Handle for LaSalle Bristol Waste Valves Gray # 34466IHANDLEGRY, Black # 34466IHANDLE.
Replacement Handle for Bladex and Valterra Waste Valves Gray... view full answer...
You can replace just the valves on the Double RV Waste Valves part # T80. For the black water you can use the Valterra Bladex Waste Valve Body part # T1003VP and for the grey water tank you can use the Valterra Bladex Waste Valve Body part # T1001VP. view full answer...
Which waste valve you'll need for your black water tank on your RV depends on the fitting that you have on your vehicle currently. As an example, if you have a male threaded hose that fits over the waste valve you'll want to use the Valterra Waste Valve for RV Black Water Tank - 3" MPT to 3" Lug # T50C. I've linked our selection of waste valves to this answer that will allow you to choose the appropriate connection. It is recommended that you use Valterra ABS Solvent # A05-0303 to complete... view full answer...
Basically the easiest way to describe it is that hubs fit over spigots. So the Double RV Waste Valves - Elbow - Rotating - 3 and 1.5 Hubs to 3 Lug Item # T80 that you referenced has a 3 inch fitting that is 3 inches in internal diameter designed for fitting over a 3 inch outer diameter (spigot) fitting.
These kits do not come apart so you'd have to replace the entire thing. view full answer...
The 601482 number you provided is an Airstream part number. But I was able to locate some information with that number and it looks like it is in fact the Double RV Waste Valves # T80.
After comparing the Double RV Waste Valves # T80 to the valve I located using the 601482 number, it looks like Airstream just changed the part number to 601482 and the # T80 is the same waste valve you currently have. view full answer...
Yes, we carry the Extension Rod Kit for Valterra Waste Valve # T1046-12VP, which comes with two adjustable extension rods to increase the length of your valve handle.
We also carry cable-actuated waste valves like the LaSalle Bristol Cable-Actuated RV Waste Valve for Black Water Tank - Spigot to Hub # 34466N4AB36GM, which can make opening your waste valves easy peasy. view full answer...
Typically it's not going to matter since the bolts are just used to hold the valve body together, so the bolts holding your current waste valve together won't matter.
If you waned to use the LaSalle Bristol Cable-Actuated RV Waste Valve for Black Water Tank - Spigot to Hub - 48" Cable # 34466N4AB48GMA you'd just want to cut off your old waste valve and slide the LaSalle on; you'd want to secure it with some ABS Solvent # 3447530889, but going this direction it wouldn't matter what your... view full answer...
There isn't a guide showing the exact black tank waste valve used on your 2016 Airstream so I have a few examples for valves you can use. If you are replacing just the valve between two flanges then the Valterra Bladex Waste Valve Body for RV Black Water Tank # T1003VP is what you'll want.
If your waste valve has two hubs and your sewer system pipes slide into those hubs then you'll want the Valterra Bladex Waste Valve for RV Black Water Tank # T40B.
If your waste valve is at the end... view full answer...
The waste valve bodies alone without a hub or spigot connection are something you can get. You would need something like the Valterra Waste Valve Bodies w/ Flexible Cables for RV Black Water and Gray Water Tanks - 72" # TC1372 for both tanks or the Valterra Waste Valve Body w/ Flexible Cable for RV Black Water Tank - 72" # TC372 for the black water tank only. There is also the Bristol Waste Valve Body for RV Black Water with Seals and Hardware - 3" Diameter # 34439240 which does not have... view full answer...
You will need to select the correct waste valve handle based on your waste valve.
Replacement Handle for LaSalle Bristol Cable-Actuated RV Waste Valves # 34490CMA1
Replacement Handle for LaSalle Bristol Waste Valves # 34466IHANDLE
Replacement Handle for Bladex and Valterra Waste Valves # T1003-6NVP view full answer...
The correct replacement for a 2 inch valve is Valterra RV Waste Valve Seals - 2" # T1002-7VP, and the correct replacement for a 3 inch valve is Replacement Seals and Hardware for 3" Valterra Waste Valves # T1003-7VP. view full answer...
Go To Results